REACTING TO A SUDDEN HOT WATER SYSTEM FAILURE: PRO ADVICE

Reacting to a Sudden Hot Water System Failure: Pro Advice

Reacting to a Sudden Hot Water System Failure: Pro Advice

Blog Article

Call

We've stumbled upon the article on How to Troubleshoot and Repair an Electric Water Heater down the page on the web and decided it made perfect sense to talk about it with you in this article.


No Hot Water — Water Heater Repair
Several modern-day residences use an electrical water heater for their heating system, because of its benefit and ease of use. Nonetheless, similar to any other electrical appliances, problems might develop with its use, suddenly. It can be really frustrating to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't hot enough or even too warm. Whatever the situation may be, hot water heater issues can be quite aggravating. The good news is, we have actually made a listing of possible solutions to your hot water heater issues. There are a number of factors that can create most of these problems, it could be a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you shut off the main power supply for safety. Whatever the trouble is, getting it taken care of should not posture excessive of an issue if you follow these actions:

Check Your Power Supply:


As standard as this might seem, it is very needed. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power issue. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it off and on again. Replace any broken or worn-out fuse. Examine the device with power after these modifications to see if it's now functioning.

Inspect the Burner in the Hot Water Heater:


If it's not a power issue, then try checking out your burner if it is still working. Examine each of your heating elements to be sure the trouble isn't with any of them. If any of them is damaged, replace that component and afterwards examine whether the hot water is back on.

Check Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't hot enough, you may need to examine the temperature settings on your upper thermostat. Ensure the breaker is turned off prior to doing anything. Open the gain access to panel and also press the red switch for temperature reset above the thermostat. This ought to aid warm the water. Transform the circuit breaker back on and inspect if the issue has actually been resolved.

Call A Professional:


If after replacing all malfunctioning components and also resetting your temperature, the water heater still isn't working, you might need to speak to a specialist plumber for a professional viewpoint. The issue with your heating unit could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of hot water needed in your house. Whatever the situation may be, a specialist plumber would certainly aid address the problem.

Final thought


Water heater issues are not constantly significant. A lot of them result from small issues like a blown fuse or damaged burner. Changing the damaged components need to suffice. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber ahead to get it dealt with.

Common Water Heater Issues and What You Should Do


What Type of Water Heater Do You Have?


Before we begin it’s first important that you identify the type of water heater you have on your property. There are two main types of water heaters out there: conventional and high efficiency.



Both of these types of products typically use either gas or electricity to heat power. There are also solar water heaters that use a thermal collector on the roof or yard to heat the water.



While these models are not as common, they can cut heating costs in half. In this article, we will focus on conventional and high efficiency.


How Do My Electric and Gas Water Heater Work?


Though they look similar, electric and gas water heaters work very differently. It’s important to know their basic function because often problems can be specific to the heating source.



In the electric model, a thermostat on the side of the machine detects the temperature of the water in the tank. When the temperature needs to rise electricity flows to a heating element suspended in the water.



Gas models also use a thermostat device — typically with a mercury sensor at the tip and an additional sensor called a thermocouple. The thermocouple detects whether the pilot light is on and controls the flow of gas.



When the thermostat drops below the appropriate level gas is released which becomes ignited by the pilot light. The flame heats the bottom of the water tank which causes hot water to rise and cold water to drop.



This natural circulation continues until the water reaches the desired temperature. Then, the thermostat triggers the gas control valve to shut off the flow of gas.


What Are the Most Common Issues and How Do You Fix Them?


n this section, we’ll go over some of the more common problems that people deal with when their water heater starts acting up. Keep in mind that some problems, like a broken pilot light, are specific to gas water heaters.



Also, remember that the best defense against water heater issues is regular maintenance. Check out some of these great tips for improving the lifespan of your water heater.


Not Enough Hot Water


This problem is common if you live in an apartment or a house with a lot of people. Too many people use the hot water supply in the tank and the machine struggles to produce more in a timely fashion.



There’s a variety of solutions to this problem, but an easy method is simply to adjust the temperature dial on your heater and wait thirty minutes.



If you have an electrical water heater, then a power surge caused by the device may cause the circuits to trip.



You should contact an electrician quickly if this issue keeps happening — it means wiring issues are causing the machine to draw more power than it needs. You may also want to try draining your water heater.



The process of draining removes the hard water sediments that cause your machine to run less efficiently. If you want a full walk-through of how to drain water your water heater tank, then make sure to read our article before you begin.



If none of these solutions fix the problem, then the issue likely lies in a malfunction component — likely a pressure relief valve or heating element.


Changing Water Temperatures


Often it’s a joke that some showers have two temperatures: scolding hot and ice cold. Unfortunately, this common feature can be a symptom of a bigger problem.



If you notice this temperature change when you shower or do the dishes, then you should check the thermostat on the side of your water heater. First, make sure it’s set to your desired temperature.



If it still exhibits drastic temperature changes, then you may need to replace the thermostat or the heating unit inside the product. The problem may also lie in the size of the product. Remember that tanks should hold roughly 20 gallons of water per person living in the house.


A Leak in the Water Heater


A water heater leak can cause serious water damage to the floor and electrical components near the device. Remember that you should always turn off the gas or electricity and let the device cool down before inspecting for a problem.



You may be able to fix the leak by tightening screw and pipe connections as these are common causes of minor leaks. However, if you notice a substantial leak at the base of the water heater, then you should contact a technician to inspect and replace it.


Rumbling Sounds


Rumbling sounds are a sign of a serious water heater issue. Unusual sounds may come from burning sediments or malfunction heating components. If you think you hear your heater boiling, then you should turn it off immediately.



This symptom is a sign of building pressure in your tank which could cause it to explode. You can likely solve this problem by draining your tank and clearing out any sediments. However, if the problem persists you may want to call a professional.


Rusty or Smelly Water


If your water smells then there is likely rust or bacteria in your water tank. These problems can cause orange discoloration and a smell like rotten eggs. However, you should first make sure that your tank is the issue and not the water source itself.



Run cold water and see if the smell persists. If the smell only comes from hot water, then the problem is the water heater. If not, then it’s the water source. If the problem comes from your tank, then it’s likely a malfunctioning anode rod.



An anode rod is responsible for cleaning any bacteria from the tank, so this is the most likely symptom. Unfortunately, changing an anode rod requires extensive knowledge of the system. As such, you will likely need the help of a professional.


Poor Water Flow


Changes in the water pressure that comes out of your shower or sink is likely a sign of sediment buildup at the bottom. Follow our previous advice — drain the tank and flush out any of the sediments.



If the problem persists, then you’ll need to check the pipes around your device. Hire a professional plumber to clean or replace the pipes around the water heater.


No Pilot Light


Gas water heaters require a pilot light to ignite the gas that warms the water. If your pilot light is out, then try reigniting it by repeatedly switching the ignitor switch. If your pilot light continues to go out, then it’s a symptom of a larger problem.



You can first try cleaning it — sometimes dirt or grime can buildup and snuff out the spark.



However, the problem can also cause things like malfunctioning thermostats, broken gas valves, or air in the gas line. First, try cleaning it and if it still goes out, then troubleshoot the various parts and replace whichever one malfunction.

https://happyhiller.com/blog/common-water-heater-issues-and-what-you-should-do/


How to Troubleshoot and Repair an Electric Water Heater

As a serious reader on Hot Water Heater Repair, I thought sharing that blog post was beneficial. Sharing is good. You just don't know, you will be doing someone a favor. Thank you so much for taking the time to read it.


Trusted by locals for emergencies.

Report this page